The final piece of the Rapunzel ensemble is ready, so Halloween can commence. The pattern (
Simplicity 2065) also included instructions for a yarn "hair" piece, which Myra has been calling her Magic Hair.
While I really thought the pattern had generally good instructions for
the dress, those for the hairpiece left much to be desired. I actually wish I had taken pictures of the process so I could do a little tutorial, because anyone attempting this thing will want to pull their own hair out.
Here is the finished hairpiece. It is basically a braided loop that has been attached to a long braid. It sounds simple, and really it is, but Simplicity's directions are terse at best and inaccurate at worst. You start the process by cutting lengths of yarn to their specifications. There is only one set of measurements, despite the fact that the pattern includes sizes 3-8. The first set you are instructed to cut is for the braid that hangs down. You are to cut 60 36 inch pieces for each braid segment, then braid them all together and tie off both ends. I found it nearly impossible to braid the segments without tangling the yarn, so I tied off each segment individually, then braided them and tied off the braid. Using scrap yarn to tie off blends nicely. The second segment, which forms the crown part, is to be 18 inch long segments. Seriously, that has to be a typo. Even for a 3 year old that is woefully inadequate, and Myra (and in fact all of my children) have HUGE heads. Instead, I used the long braid that I already had made (which was the 36 inch pieces braided) and wrapped it around her head to approximate how much yarn I would need. It overlapped by about 4 inches, so I went with 34 inch pieces of yarn, which I thought would be a bit too long, but ended up being just right. I only trimmed about an inch of tails off. Crazy. So, measure, then overestimate. Trimming is MUCH easier than redoing the whole thing.
The other complete inadequacy in these instructions is the attachment. All Simplicity has to say is "Hand sew or glue the crown portion into a circle, them attach the braid, covering the intersection with a large flower." Hand sew a bunch of yarn tails together??? I really had no idea how to go about doing that, so I didn't.
Instead, I took some scraps of jersey and overlapping the ends of the crown, tied them together with the jersey strips. I used jersey partly because I had just cut out a cardigan and it was lying around, but also because the stretch allowed me to get the ties really tight. I then laid the braid over the intersection of the crown and
lashed it on with more strips of jersey. I'm really glad I paid attention at camp when I was a teen. Who knew I'd use all those knots one day?
After the braids were secured, I hot glued some of the sequin trim I used on the skirt to the bottom of the braid, then hot glued the flowers in place.
I'm glad I struggled through putting this together, because it totally makes the costume, but I hope my notes make it a little easier on some of you. I think as a finishing touch I'm going to crack open a yellow glow stick so the hair actually glows on Halloween night. Was I the only one who used to paint themselves with glow sticks as a kid? Everyone I've said that to IRL looks at me like I'm crazy, but won't it be cool if Rapunzel's hair actually glows?
